Ambiq

Embedder includes a board-specific skill for the Apollo510 EVB (AP510EVB). Use it for board setup, flashing, J-Link/SWD debugging, firmware output, and recovery. This guide covers the non-radio Apollo510 EVB; the Apollo510B EVB (AP510BEVB) uses different hardware and pin assignments. The skill requires a matching project platform, such as AP510EVB. Check the slash-command picker after selecting your project. If the platform or skill is unavailable, attach the board manual and schematic and ask Embedder to use those documents. Board-skill setup explains this fallback; creating a custom project does not guarantee that the bundled skill becomes available. Include the board revision, SDK version, and J-Link device name in your request. Use the output connection configured by the project: ITM/SWO, RTT, or UART. For example:

Help me bring up this AP510EVB project. Use the available board skill or attached
board manual and schematic. Verify the build
and J-Link configuration, then propose a flash and boot check using the project's
existing output connection.

Before erasing or reflashing a locked device, review the recovery procedure in the Apollo510 documentation. See GDB debugging and serial transports for the debugging and logging workflows.

Overview

General semiconductors

Community

8-bit microcontrollers

Peripherals